The economy Hemi Predator Mod 2 kit comes with the following

Economy diecast 28 deg hemi predator flywheel

6254 billet ARC rod (stock 3.308 length for .020 below deck piston height)

Mod 2 hemi pre-clearanced Dyno cams camshaft

22 pound springs

4 deg timing key

Valve cover gasket

Side cover gasket

.009 head gasket

This kit will be perfect for the beginner builder that wants a little more juice than his stock carb update and pipe will give him. By using a .009 head gasket with the 3.308 rod you will increase compression to 9.5:1 and still be able to run 87-93 octane fuel (prefer 89-93) but because you haven't milled the head you will be able to still use your stock pushrods. It will easily make power past 7000 rpm and will work very well with a china VM22 or equivalent carburetor as well as stock or bored stock units.

Don't forget lapping compound for your flywheel and if you would like to add chromoly pushrods I would recommend our 5.540" X 3/16" rods and 5.440" for milled head applications.

Still looking for more and want a custom head? Yes, we can help with that to. Feel free to check out our custom head selection or ask.